|
 |
 |
|
Lubrication point :
3 Propeller shaft
main bearing |
| |
During Assembly
and Maintenance :
Spry MOLYKOTE® G Rapid
Plus Spray or MOLYKOTE® 321R
Bonded Lubicant Spray (allow
to dry 20 minutes) onto
clean surface. |
| |
During Operation :
Add 3-5% of
MOLYKOTE® M55 Plus
to the oil by volume. |
| |
Result :
Prevents over-heating.
Easier running-in |
Lubrication point :
6 Journal and guide bearings |
| |
During Assembly
and Maintenance :
Spry MOLYKOTE® G Rapid
Plus Spray or MOLYKOTE® 321R
Bonded Lubicant Spray (allow 20
minutes to dry) onto bearing
surfaces before assembly. |
| |
During Operation :
Relubricaste with
MOLYKOTEc BR-2 Plus
Grease or MOLYKOTE®
Longterm 2 Plus Grease. |
| |
Result :
Low torque.
Extended lubrication intervals. |
Lubrication Point :
7 Fitted bolts |
| |
During Assembly
and Maintenance :
Clean thread surfaces thoroughly
and spray with MOLYKOTE® 321R
Bonded Lubricant Spray or apply
MOLYKOTE® 1000 Antiseize Paste |
| |
Result :
Troble-free assembly.
No fretting corrosion.
Non-destructive disassembly.
Controlledn torque. |
Lubrication Point :
5 Piston valves |
| |
During Assembly
and Maintenance :
Clean sliding surfaces. Apply a
thin coat of MOLYKOTE®
G-n Plus Paste. |
| |
During Operation :
If grease lubrication specified,
use MOLYKOTE® BR-2 Plus
Grease or MOLYKOTE®
Longterm 2 Plus Grease. |
| |
Result :
Reduced friction.
Extended lubrication intervals. |
Lubrication Point :
4 Steering macinery Plungers |
| |
During Assembly
and Maintenance :
Clean the plunger surfaces. Apply
MOLYKOTE® 321R Bonded Lubricant
Spray. Allow to dry for 20 minutes.
Apply DOW CORNING®
G-n Plus Paste. |
| |
During Operation :
Mix 3-5% of
MOLYKOTE® M55 Plus
into the hydraulic oil. |
| |
Result :
Safe running-in. No sucffing.
MOLYKOTE® M55 Plus keeps
the solid lubricasnt film intact |
|
|
